High Strength Toilet Pan Connector One Piece Structure For Bathroom Fittings

The toilet wall is arranged in a row with a common drain tube seat

Install the drain pipe of the rear drain toilet

1. Select the toilet with the same hole spacing according to the hole spacing in your home

2. Prepare the flange, Angle valve, inlet pipe and glass glue for installation.

3. Just install it directly.

The installation method of toilet and squat toilet is introduced

1. Toilet installation

Toilet installation is relatively easy, after buying back commonly, oneself install or ask worker teacher to install.Although toilet installation is simple, but master the installation method of toilet is very important, only install accurate toilet ability lets a person rest assured use.Here's a look at the general procedure for installing a toilet.

1. Check the level of sewage pipes and ground water

Should first to discharge pipes before installation closestool to conduct a comprehensive inspection, look at whether there is mud, sand, waste paper and other debris inside the pipe blockage, at the same time check whether around the toilet before and after installing a ground level, such as to find the ground, when installation should be leveling the ground.

2. Determine the sewage pipe center

Flip the toilet, determine the center on the toilet drain, and draw the cross center line, which should extend to the feet around the bottom of the toilet.

3. Fixed toilet

Align the cross wire on the toilet with the floor drain, keep the toilet installed horizontally, press the sealing ring firmly, install the floor screw and decorative cap.

4. Make the bottom seal well

Install a special seal ring on the toilet drain, or make a round of glass glue (putty) or cement mortar. The ratio of cement to sand is 1:3.

pvc toilet connector

toilet flush pipe connector

High Strength Toilet Pan Connector One Piece Structure For Bathroom Fittings Images